VIPA IM 253 DP Series Скачать руководство пользователя страница 6

Страница: 6 / 100

About this manual

Manual VIPA System 200V

HB97E - IM - RE_253-xDPxx - Rev. 12/44

This manual describes the System 200V PROFIBUS DP slave modules
IM 253-xDPxx from VIPA. It contains a description of the construction,
project implementation and usage.

This manual is part of the documentation package with order number
HB97E_IM and relevant for:

Product

Order number

as of state:

IM 253DP

VIPA 253-xDPxx

The manual is targeted at users who have a background in automation
technology.

The manual consists of chapters. Every chapter provides a self-contained
description of a specific topic.

The following guides are available in the manual:

•

an overall table of contents at the beginning of the manual

•

an overview of the topics for every chapter

The manual is available in:

•

printed form, on paper

•

in electronic form as PDF-file (Adobe Acrobat Reader)

Important passages in the text are highlighted by following icons and
headings:

Danger!

Immediate or likely danger.

Personal injury is possible.

Attention!

Damages to property is likely if these warnings are not heeded.

Note!

Supplementary information and useful tips.

Objective and
contents

Target audience

Structure of the
manual

Guide to the
document

Availability

Icons
Headings

Содержание IM 253 DP Series





































































































Результаты поиска

Содержание IM 253 DP Series

Отзывы:

VIPA IM 253 DP Series, Руководство пользователя, Страница: 6 / 100

Результаты поиска

Содержание IM 253 DP Series

Отзывы: