VIPA IM 253 DP Series Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 100

VIPA IM 253 DP Series Скачать руководство пользователя страница 54

Chapter 3 Deployment IM 253DP

Manual VIPA System 200V

3-14

HB97E - IM - RE_253-xDPxx - Rev. 12/44

IM 253-xDPxx - DP-V0 slave - Diagnostic functions

PROFIBUS DP provides an extensive set of diagnostic functions for quick
error localization. Diagnostic messages are transferred via the bus and
collected by the master.

The most recent 100 diagnostic messages along with a time stamp are
stored in RAM res. saved to the Flash of every VIPA PROFIBUS slave.
These can be analyzed by means of software.

Please call the VIPA hotline for this purpose.

The system also stores diagnostic messages like the status "Ready" or
"DataExchange". These are not send to the master.

The contents of the diagnostic RAM is saved by the PROFIBUS slave in a
Flash-ROM, every time the status changes between "Ready" and
"DataExchange". At restart it deposits the data back to the RAM.

You can manually save the diagnostic data in Flash-ROM by changing the
address switch to 00 during "DataExchange" for a short while.

If a power failure or a voltage drop is detected, a time stamp is saved in the
EEPROM. If there is still enough voltage left, the diagnostic data is
transferred to the master.

At the next startup the time stamp in the EEPROM is used to generate an
undervoltage/power-off diagnostic message and saved to the diagnostic
RAM.

At deployment of a redundant slave, the diagnostic telegram is extended
with an 8Byte sized redundant state. This diagnostic addition is not inter-
nally stored. By additionally configuring the state module "State byte IM253-
2DP50" as last "module" (most slot number), you are able to include 2Byte
of the redundant state into the peripheral area.

This virtual state "module" is available from GSD version 1.30 on.

Overview

Internal diagnostic
system messages

Saving diagnostic
data manually

Diagnostic
message in case
of a power failure

Diagnostic
addition at
IM 253DPR

«
...
52
53
54
55
56
...
»

Содержание IM 253 DP Series





































































































Отзывы:

Нет отзывов