Manual VIPA System 300V
Chapter 4 Deployment CP 343-2P ASI
HB130E - CP - RE_343-2AH10 - Rev. 08/41
4-7
Uploading the current configuration to PG
In the Siemens SIMATIC manager there is the possibility to transfer the
current configuration stored in the Flash-ROM of the CP to your project.
Here the register "AS-i slave options" of the "properties" of the CP may be
used. The configuration is transferred to your project by the button [Upload
to PG].
Here this configuration may be changed or used for further configurations.
In addition the configuration may be checked without confirmation by
leaving the dialog with [cancel] button after checking it up.
•
Create a basic configuration. Here insert the CP 343-2P without AS-i
slaves to the hardware configuration.
•
Save and translate your project and transfer it to the CPU.
•
Execute a button configuration (see same named chapter). The current
configuration is now stored in the Flash-ROM of the CP.
•
Open the properties of the CP 343-2P in the Siemens hardware
configurator.
•
Select the register "AS-i slave options".
•
Click to the button [Upload to PG]. Since during this procedure a
configuration in your project is overwritten, an appropriate warning is to
be confirmed before.
•
Go to the register "Slave configuration". Here the current configuration
may be checked and handled.
Note!
To use the function for information despite an existing configuration, the
current configuration may be uploaded and then after checking it, the
dialog is to be closed with the [Chancel] button. So the current project is
not influenced.
Overview
Precondition
Procedure