VIP Vision Intercom Installation Manual - Version: INT-Q320
32
5.1 Manual Configuration of 1 Apartment Door Station & 2 Monitors (Cont.)
17. Select
VTH Config
and change the
Room No.
to
1
. Ensure
Master
is selected. Select
OK
. (Fig 5.9)
18. Select
SIP Server
and set the
Server IP, User Name and Login Pwd
. These will be the IP Address, username and
password of the Door Station (192.168.1.108, admin, admin123). Do not modify the register password (123456 by
default). Select
OK
. (Fig
19. Select
VTO Config
. Set the
Main_VTO Name
to an easily identified name for the door (e.g Gate or Doorbell).
Set the
VTO IP Address, User Name and Password
. These will be the IP Address, Username and Password of
the Door Station.
Turn the Enable Status button OFF then ON
to save the settings.
Ensure it is left in the ON
position.
20. For monitor 2,
repeat steps 12 through to 19
, ensuring the Local IP address of the Indoor Monitor and room
number, are different between each Indoor Monitor.
21.
Allow up to 10 minutes for the Indoor Monitors to connect to the Door Station.
Once the “
” icon disappears,
you can press the call button on the Door Station to test the connection.
Fig 5.11:
VTO Config
Fig 5.10:
SIP Server Settings
