VIP Vision Intercom Installation Manual - Version: INT-Q320
18
5. If prompted with
Do you want to do quick configuration?
, Select
OK
. If Step 3 was completed, skip this step.
6. Select
Initialize
next to the uninitialized Door Station (VTO) and set a user
password
(admin123) and
. Select
OK
. (Fig 3.4)
8. Select
Edit
next to the
Indoor Monitor (VTH)
. Set the device type to
Main
and set the
IP Address
(192.168.1.109),
Netmask
(255.255.255.0) and
Gateway
(192.168.1.1). Select
OK
. (Fig 3.6)
9. Select
Edit
next to the
Door Station (VTO)
. Set the device type to
Main
and set the
IP Address
(192.168.1.108),
Netmask
(255.255.255.0) and
Gateway
(192.168.1.1). Set the Time and Date. Select
OK
. (Fig 3.7)
10. Once all devices have had their IP address details and device type set, select
One-Key Config
. The devices will
now be configured.
NOTE:
If an error occurs during the configuration, ensure the entered details are correct.
(Refer
to
Section 9
for troubleshooting)
11.
Once the devices have successfully configured, select
OK
.
12.
The devices will reboot, allow up to 10 minutes for them to connect.
7. Once all of the devices are initialized, select
Next
. (Fig 3.5)
Fig 3.4:
VTO Initialisation
Fig 3.5:
Device Initialisation
Fig 3.6:
Network Config
Fig 3.7:
VTO Config
