Vinyl Express Qe60, Руководство пользователя

Страница: 51 / 116

4 – 9
The cutting plotter is capable of reading the following registration-mark patterns.
The range required for the detection of registration marks is as shown below.
Blank margins must be left between the medium edges and the registration marks to enable the marks to
be read.
Note: The margins in parentheses are the blank margins that must be left between the medium edges and
the cutting area in SHEET mode.
Registration-mark pattern
Reading range required for the detection of registration marks
• Incorrect detection may occur if there are marks other than registration marks
within the reading range. If drawings overlap the registration-mark reading range,
refer to “Setting the Registration-mark detection movement distance.”
• Incorrect detection may occur if the registration-mark reading range is dirty or
foreign matter is adhering to the medium surface.
Medium and registration-mark position
Registration-mark pattern 1
Medium feed direction
Registration-mark pattern 2
X
Y
Registration-mark reading range
a=6mm
a
a
a
a
Registration-mark pattern 2 Registration-mark pattern 1
Medium f
eed direction
X
Y
Registration-mark reading range
a=6mm
a a
CHECKPOINT
Registration-mark pattern 1
Medium f
eed direction
Registration-mark pattern 2
Right-hand
push roller
15 15
50
10
Left-hand
push roller Right-hand
push roller
15 15
50
（
30
）
（
30
）
10
Left-hand
push roller
Units: mm
X
Y