Back
21
Applying pan and tilt drag
Both the pan and tilt mechanisms incorporate a fluid drag system to ensure smooth movement of
the camera about these axes. The tilt drag control
(11)
is located on the left-hand side of the head
and the pan drag control
(7)
is located at the back of the head, beneath the camera mounting plat-
form.
To increase tilt drag:
Turn the tilt drag control
(11)
in a clockwise direction (downward).
To decrease tilt drag:
Turn the tilt drag control
(11)
in a counter-clockwise direction (upward).
To increase pan drag:
Turn the pan drag control
(7)
in a counter-clockwise direction (left to right).
To decrease pan drag:
Turn the pan drag control
(7)
in a clockwise direction (right to left).
NOTE:
The whip-pan facility is not affected by the pan drag setting.
CAUTION! Reduce drag to a minimum when the head is out of use for long periods, to
minimize wear on drag components.
Fig. 13 Adjusting the pan and tilt drag
+
_
+
_
Содержание V4045-4980
Страница 1: ...Vision AS range Operators Guide V4045 4980 Vinten simply perfection pan and tilt heads ...
Страница 2: ...Vision AS range Pan and Tilt Heads Original Instructions Issue 1 ...
Страница 26: ...Back 25 Fig 15 Adjusting the pan and tilt brakes 10 1 12 1 10 2 10 12 2 12 ...
Страница 31: ...Back 30 NOTES ...