Back
14
Mounting the camera using the 1/4 in. screw and pin
adaptor
A 1/4 in. screw and pin adaptor, comprising a 1/4 in. locating pin on a plate and a 1/4 in. camera
mounting screw, is stored in the camera storage compartment
(18)
on right-hand side of the cam-
era mounting platform. The process of mounting the camera onto the head is the same as de-
scribed in
Mounting the camera using 3/8 in. camera mounting screws
on page 12.
To mount the camera onto the head:
Remove the camera slide plate
(16)
from the head
(Fig. 3)
. Turn the slide plate clamp
(13)
approximately 1/2 a turn in a counter-clockwise direction to release the clamp. Then push
the slide lock release
(14)
in a forwards direction to release and eject the slide plate
(16)
.
When released, the camera slide plate
(16)
can be lifted upwards and removed from the
head.
Open the camera storage compartment
(18)
by lifting the cover upwards and remove the 1/
4 in. screw and pin adaptor
(19)
(Fig. 6)
.
Fig. 5 Mounting the camera onto the head
1
2
13
13
1
2
13
13
A
B
13
Содержание V4045-4980
Страница 1: ...Vision AS range Operators Guide V4045 4980 Vinten simply perfection pan and tilt heads ...
Страница 2: ...Vision AS range Pan and Tilt Heads Original Instructions Issue 1 ...
Страница 26: ...Back 25 Fig 15 Adjusting the pan and tilt brakes 10 1 12 1 10 2 10 12 2 12 ...
Страница 31: ...Back 30 NOTES ...