Back
12
Mounting the camera using 3/8 in. camera mounting
screws
The camera slide plate
(16)
is secured to the base of the camera using either two 3/8 in. camera
screws or a 1/4 in. screw pin adaptor (see
Mounting the camera using the 1/4 in. screw and pin
adaptor
on page 14).
To mount the camera onto the head:
Remove the camera slide plate
(16)
from the head
(Fig. 3)
. Turn the slide plate clamp
(13)
approximately 1/2 a turn in a counter-clockwise direction to release the clamp. Then push
the slide lock release
(14)
in a forwards direction to release and eject the slide plate
(16)
.
When released, the camera slide plate
(16)
can be lifted upwards and removed from the
head.
Fig. 3 Removing the camera slide plate
(13)
(14)
(16)
Содержание V4045-4980
Страница 1: ...Vision AS range Operators Guide V4045 4980 Vinten simply perfection pan and tilt heads ...
Страница 2: ...Vision AS range Pan and Tilt Heads Original Instructions Issue 1 ...
Страница 26: ...Back 25 Fig 15 Adjusting the pan and tilt brakes 10 1 12 1 10 2 10 12 2 12 ...
Страница 31: ...Back 30 NOTES ...