Back
20
until it balances horizontally. Tighten the slide plate clamp
(13)
to secure the camera in
position. Re-check and adjust as necessary.
Using the pan bar
(5)
, tilt the head backwards and forwards. Turn the Perfect Balance
control
(3)
clockwise until the camera remains in position and does not fall away when the
head is tilted and then released (hands-free).
Repeat the setup until perfect balance is achieved, when the camera remains set at any
angle from +90° to –90° without falling away or springing back.
Apply the tilt brake
(12)
when balance is achieved to prevent the camera from moving
accidentally when not in use.
Applying the pan and tilt brakes
Brakes on each axis allow the head to be locked at any chosen position. The pan brake
(10)
and
tilt brake
(12)
are fitted at the left-hand side of the head
.
To apply the brake:
Turn the brake lever fully clockwise.
To release the brake:
Turn the brake lever fully counter-clockwise
WARNING!
Securely apply the slide plate clamp (13) when the camera is positioned, to
prevent the camera payload slipping.
NOTE:
Maximum tilt angle is less than 90° for heavy payloads with a high C of G -
refer to the balance graphs (Fig. 8 to Fig. 11).
CAUTION! DO NOT use the brakes to supplement drag, the head may be damaged.
When the brakes are not in use, always ensure they are fully released.
CAUTION! DO NOT use force on the brake levers. Hand tighten only.
Содержание V4045-4980
Страница 1: ...Vision AS range Operators Guide V4045 4980 Vinten simply perfection pan and tilt heads ...
Страница 2: ...Vision AS range Pan and Tilt Heads Original Instructions Issue 1 ...
Страница 26: ...Back 25 Fig 15 Adjusting the pan and tilt brakes 10 1 12 1 10 2 10 12 2 12 ...
Страница 31: ...Back 30 NOTES ...