![background image](http://html1.mh-extra.com/html/vinpower/the-cube-3-6-0/the-cube-3-6-0_user-manual_1028405039.webp)
37
System Utilities
1.Disc Info
Disc Info
Please Insert Disc
Disc Info
3 Disc Detected, GO?
Setup
15.BD Safe Copy Menu
BD Safe Copy Menu
Show
BD Safe Copy Menu
Hide
Press
the
Down
button repeatedly until “0” is displayed.
Press
ENT/Enter
button once to move the cursor to the next position.
Press
the
Down
button repeatedly until “2” is displayed.
Press
ENT/Enter
button once to move the cursor to the next position.
Press
the
Down
button repeatedly until “1” is displayed.
Now, “021” is displayed, press
ENT/Enter
button once and the cursor moves to
“OK”
.
Then, press the
ENT/Enter
button once to submit your maximum failures per job.
13.15 BD Safe Copy Menu
Use this setting to determine whether to show or hide
“BD Safe Copy”
on the main menu.
Note:
This setting will only be shown in Blu-ray models.
Use the
Up or Down
button to select the
BD Safe Copy Menu
menu
and press the
ENT/Enter
button to enter that menu.
Use the
Up or
Down
button to select whether the
BD Safe Copy
menu
is to be shown or hidden, and press the
ENT/Enter
button to select that
option.
14 System Utilities
System Utilities
is used to provide useful tools for duplication aspect of the system. Each of these options is
discussed in its own subsection.
14.1 Disc Info
Use the
Disc Info
utility to identify the type and other information about your blank recordable media.
.
Note:
The Disc Info function does not use the robotic capabilities of the system. You must manually
insert the discs into the drives.
Use the
Up or Down
button to select the
Disc Info
menu and press the
ENT/Enter
button to enter that menu. The system will proceed to the
Please
Insert Disc
menu.
Place your disc(s) into the drives.
After a few seconds, the system will detect the discs and ask you if you want
to proceed. Wait until all of the discs have been detected and press the
ENT/Enter
button to continue.
14.2 System Info
The
System Info
menu provides a lot of hardware information about the autoloader such as firmware
versions, Duplication/Robot Control Boards type, etc. You can scroll through the various specifications by
pressing the
Up or Down
button.