Vinotemp Wine-Mate WM-4510HZD, Инструкция по установке, использованию и уходу

Страница: 21 / 39

- 20 -
•
The supply duct can be maximum 50 ft long.
•
The cooling unit can also be installed with other configurations shown
above.
Fig. 4.12 Flush to the outside of wall with cold-air supply duct & wall grille
6. Remote installation with cold-air supply and cellar-air return ducts only
(Fig. 4.13)
It is the installation when the cooling unit can not be installed inside the wine
room but it can exhaust the hot air to an adjacent space.
NOTES:
•
The supply and return ducts can be combined maximum 50 ft long.
•
Insulate the cold side of cooling unit for better performance.
•
If the air probe is in a return duct, the evaporator fans shall be running
all the time. Meanwhile the set-point shall be adjusted accordingly due
to the temperature differential between return duct air and the cellar air.
1) Cut two circular openings at the wine cellar ceiling or wall as illustrated.
2) Secure the cooling unit on the top of the wine cellar or other strong flat places
3) Remove the front cover of the cooling unit.
4) Attach the duct hoods to the front the cooling unit with screws (Use #8 x ½L
screws only).
5) Attach the insulated ducts to the hoods with adhesive tapes.
6) Secure the ducts with conduits to the wine cellar ceiling and exterior walls and
make sure they are not curled, twisted, bent and clogged.