background image

Limited Warranty

Lutron offers an 8-year limited warranty for our
shading systems. Please contact customer
service or visit our website for a complete 
warranty statement.

Lutron reserves the right to make improve-
ments or changes to these products without
prior notice. Although every attempt is made to
ensure that this information is accurate and up
to date, please check with Lutron to confirm
product availability, the latest specifications,
and suitability for your application.

These products may be covered by one or
more of the following US patents: 

6,983,783

and corresponding foreign patents.
US and foreign patents pending.

Lutron, the Sunburst logo, and Sivoia are 
registered trademarks, and Sivoia QED is a
trademark of Lutron Electronics Co., Inc.

©

2005 LUTRON Electronics Co., Inc.

Printed in the U.S.A.

P/N 045-118 REV. B 

Technical Assistance

WORLD 

HEADQUARTERS

Lutron Electronics Co., Inc.

7200 Suter Road

Coopersburg, PA 18036

United States

Tel: +1-610-282-3800

Fax:+1-610-282-1243

EUROPEAN

HEADQUARTERS

Lutron EA Ltd.

6 Sovereign Close

London, E1W 3JF

United Kingdom

Tel: +44-(0)20-7702-0657

Fax: +44-(0)20-7480-6899

CUSTOMER

SERVICE/ORDERING

UK +44-(0)20-7702-0657 – 

09.00 - 18.00 GMT

USA +1-800-446-1503 

08.00 - 20.00 EST

CUSTOMER SERVICE

/E-MAIL

[email protected]

TECHNICAL SUPPORT 

& SERVICES

USA +1-800–523-9466 

24 hours/7 days

UK +44-(0)20-7702-0657

09.00 - 18.00 GMT

INTERNET:

www.lutron.com

ADDITIONAL LUTRON

SALES OFFICES:
Germany

Tel: +49-309-710-4590 

Fax: +49-309-710-4591 

FREEPHONE 

00800-5887 6635

France 

Tel: +33-(0)1-44-70-71-86 

Fax: +33-(0)1-44-70-70-97 

FREEPHONE 0800-90-12-18

Spain-Madrid

Tel: +34-91-567-84-79 

Fax: +34-91-567-84-78 

FREEPHONE 0900-948-944

Spain-Barcelona

Tel: +34-93-496-57-42 

Fax: +34-93-496-57-50 

FREEPHONE 0900-948-944

Hong Kong

Tel: +852-2104-7733 

Fax: +852-2104-7633

Beijing 

Tel: +86-10-5877-1817

Fax: +86-10-5877-1816

Shanghai

Tel: +86-21-6288-1473

Fax: +86-21-6288-1751

Singapore

Tel: +65-6220-4666

Fax: +65-6220-4333

Japan

Tel: +81-3-5575-8411 

Fax: +81-3-5575-8420

Содержание Lutron Roller 64 Dual Mount

























Отзывы: