SIVOIA QED
TM
Roller 64 Dual Mount
Installation Instructions
15
Reconnect power to the shade power supply.
Use the programming stylus to run the shade up and down using the adjustment
buttons (
), re-level if needed.
Observe: Pay careful attention to the shade roll up to ensure that it does not telescope
extremely to one side or the other.
Tip: Slight telescoping is normal. However, if the shade is telescoping severely to one
side and it is level, press the “Close Limit Button” ( ), and lower the shade all the way
down using the adjustment buttons (
). Place a piece of tape on the side of the tube
that the fabric is telescoping away from when finished press the “Close Limit Button” ( )
once. This technique is referred to as “SHIMMING”. The shade will always track towards
the side that the tape (shim) is placed on.
11.2
Secure and Check the Shade (continued)