Vimar ELVOX SW24.W, Руководство пользователя

Страница: 23 / 32

21
SW24.W
IN
C(X)
Close (CLS)
The close command:
- with the gate stopped and
closed, is ignored
- in opening, closes the gate
- with the gate stopped, closes the
gate
- in closing is ignored
4
(C4)
Timer (TIM)
The timer command:
- when closed, opens the gate
and keeps it open as long as the
contact remains closed
- when the contact is released it
closes the gate
5
Pedestrian Timer (TIMP)
Has the same function as the timer
command but on the pedestrian
position
6
S(X)
S1/S2/S3/S4 safety input
Off
OFF
(S3 S4)
Photocell closing (PHC)
The closing photocell:
- with the gate stopped, allows the
gate to open
- in opening does not intervene
- with the gate open, does not al-
low it to close and when released
will reset the pause time
- in closing, reopens the gate im-
mediately
1
(S1)
Photocell (PH)
The photocell:
- with the gate stopped, does not
allow the gate to open
- during opening stops the
movement and when released
proceeds with opening
- with the gate open, does not al-
low it to close and when released
will reset the pause time
- in closing stops the movement
and when released reopens the
gate
2
(S2)
Opening photocell (PHO)
The opening photocell:
- with the gate stopped, allows the
gate to open
- in opening, recloses it completely
- with the gate open, allows it to
close and does not reset the
pause time
- in closing does not intervene
3
IN S(X)
Sensitive edge with NC clean
contact (BAR)
- with the gate stopped, does not
allow the gate to open
- in opening disengages
- with the gate open, does not al-
low it to close and when released
will reset the pause time
- in closing disengages
4
8.2 KΩ balanced sensitive edge
(8K2)
Same behaviour as the NC sensi-
tive edge
5
Stop (STP)
- stops the gate
Interrupts the automatic closing
as per the logic stop setting from
stop (L12)
6
Photocell closing checked
(PHC)
As per closing photocell but with
check
7
Photocell checked (PHT)
As per photocell but with check
8
Photocell opening checked
(PHC)
As per opening photocell but with
check
9
NC sensitive edge checked
(BART)
As per KΩ NC sensitive edge but
with check
10
8.2 KΩ balanced sensitive edge
checked (8K2T)
As per 8.2 KΩ sensitive edge but
with check
11
LGC
Control panel logic settings
Sub
menu
Description Values
(default)
L1
Automatic closing (ON)
Automatic closing off OFF
Automatic closing on ON
L2
Pause time (30)
1 s (minimum time) 1
180 s (maximum time) 180
L3
Pedestrian pause time (20)
1 s (minimum time) 1
180 s (maximum time) 180
L4
State on power up (OP)
Gate in closed position:
The first step-step command
opens the gate.
CL
Gate in open position:
The first step-step command
closes the gate. If automatic clos-
ing is on, after the pause time the
gate closes
OP
EN