5. Control unit description.
Control unit for governing gear motors for sliding gates at 230/120 VAC equipped with inputs for built-in receiver limit switch.
The control unit is:
- designed to customise the space and speed of deceleration in both opening and closing phases.
- equipped with an obstacle detection system (if there is an encoder circuit)
- designed for input diagnostics via LED
- fitted with an integrated receiver with capacity for 250 remote control codes (hard coded or rolling code)
F2=F5A
M2
17
16
15
14
345678
9
10
11
12
SCL
SEQ
STOP
PED
LSC
LSO
SOP
COM
+AS
-AS
+WL
M1
18 19
1
2
20
FL FL
M
C
OM
MOP MCL
L
N
13
P.OUT
21
TR1 TR2 TR3
TR4
TR5
DSW1
1 2
ON
3 4 5 6 7 8
PROG
DL.S
DSW2
1 2
ON
P1 P2
CN1
P.IN
+
DL3
DL1
DL4
DL2
DL5
DL7
DL6
DL8
CN
2
22
23
AN
T
G
N
D
ELVOX SL230.T
1
2
3
4
5
8
7
6
9
10
Key:
1. Removable terminal for 24 VDC outputs, for safety devices and control inputs
2. Removable terminal for the power supply line, flashing lamp and 230 VAC electric motor
3. Fixed antenna terminal
4. LED for input diagnostics
5. LED for programming diagnostics
6. Push buttons for programming the travel and remote controls
7. Trimmer for adjustments
8. Dip switch for programming functions
9. Protection fuse for the motor output, transformer and flashing lamp (230V F5A quick-acting, 120V F6.3 A quick-acting)
10. Encoder
Connector (
only for motor models with Encoder)
CAUTION:
Secure the cables on the actuator with cable ties, to avoid them becoming loose and creating hazardous situations.
In addition, secure the cables of the M2 power terminal block with cable ties separately from the cables of the M1 signal terminal block.
16
SL230.T - SL230.T.120
EN
