15
1. Product characteristics:
Control unit for rolling doors. This device can control 230Vac electric motors with integrated limit switch for a maximum of 1 KW.
The control unit has the following functions:
- separate inputs for opening and closing
- inputs for opening and closing safety devices
- output for second radio channel
- LED for input diagnostics
- integrated receiver at 433.92 MHz with capacity for 200 remote controls with 2 channels (hard coded or rolling code)
Technical characteristics:
Back box dimensions
190 x 140 x 70mm
Protection rating
IP56
Power supply
230 Vac 50/60 Hz
Consumption in standby
3.5 W
Fuse F1 230V
5 AF 5 x 20 mm
Fuse F2 24V
500 mAF 5 x 20 mm
Motor and flashing light relay contacts
10 A 230 Vac
Courtesy light and second radio channel relay contacts
1 A 24 Vdc
Motor output
230 Vac 1 KW max
Output for flashing light
230 Vac 60 W max
Accessories power supply output
24 Vdc 300 mA max
Output for test
24 Vdc 300 mA max
Output for courtesy light
24 Vdc 5 W max
Input for opening button
1 input for NO pushbuttons
Input for closing button
1 input for NO pushbuttons
Input for sequential button
1 input for NO pushbuttons
Input for stop
1 input for N.C. contacts
Input for opening safety device
1 input for NC contacts or resistive sensor 8K2
Input for closing safety device
1 input for NC contacts or resistive sensor 8K2
Receiver memory
Up to 200 remote controllers with 2 buttons
Remote controller encoding and working frequency
Rolling Code and hard coded 12-bit 433MHz AM
Operating temperature
-20/+60°C
2. Control unit description:
Fig. 1
Key:
1- Removable terminal for mains connection, electric motor power supply and flashing light
2- Removable terminal for connection of control inputs and safety devices
3- Removable terminal for aerial connection
4- Radio module
5- Configuration Dip-switch
6- Button for saving or deleting remote controls
7- Diagnostics LED for programming
8- Button for programming the travel
9- Trimmer for adjustment of pause time
10- Trimmer for adjustment of working time
11- LED for input diagnostics
12- Fuse F2 500 mAF 5 x 20 mm for protection of logic and 24Vdc outputs
13- Fuse F1 5 AF 5 x 20 mm for protection of transformer, electric motor and flashing light
EN
