The instruction manual can be downloaded from
www.vimar.com
Installation rules
• Installation and configuration must be carried out by qualified persons in compliance with the current regulations regarding the installation of electrical equipment in the country where the products
are installed.
• Install the device at a height of no more than 2 m.
IMPORTANT: The power supply must be connected to the a.c. mains by way of an easily accessible double pole switch having a gap of at least 3 mm between contacts.
• The relay output power supply circuits must be protected against overloads by installing devices or fuses with a rated breaking capacity of 1500 A or automatic 1-way switches type C, with a
rated current not exceeding 10 A.
Regulatory compliance
• LV Directive. EMC Directive. RoHS directive.
•
Standards:
Standards EN 62368-1, EN 55032, EN55035.
• REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.
• The power supply units constitute a SELV source in observance of the requirements set out in Article 411.1.2.2 of CEI standard 64-8 (ed. 2012).
WEEE - Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included with other general waste at the end of its working life. The user must
take the worn product to a sorted waste center, or return it to the retailer when purchasing a new one. Products for disposal can be consigned free of charge (without any new purchase
obligation) to retailers with a sales area of at least 400m
2
, if they measure less than 25cm. An efficient sorted waste collection for the environmentally friendly disposal of the used device,
or its subsequent recycling, helps avoid the potential negative effects on the environment and people’s health, and encourages the re-use and/or recycling of the construction materials.
17
EN
69PH