figura - figure 6
Programming with SAVEPROG software
SaveProg is a PC software package supplied together with interfaces
Art. 692I and 692I/U. Install the software on the PC. Launch the pro-
gram by clicking on the
icon.
The image of Figure 5 is displayed.
NOTE
: When the relay is connected to the HORIZONTAL BUS
check off the Flag. HORIZONTAL BUS as indicated by the arrow.
Select the icon highlighted by the arrow in Figure 6, the window
appears where you can select the Relay 69PH EXTENDED). After
confirming with OK the configuration window will open for the 69PH.
Remove the check mark from Mode
692R.
figura - figure 5
figura - figure 7
figura - figure 8
12
EN
69PH
