GROUP
DEV. GROUP 4
DEV. GROUP 3
DEV. GROUP 1
DEV. GROUP 2
Op. Modes
Call Rep.Type
Call Rep. for Grp. 1
Default
Monostab. On SR
Monostab. On F2
Monostab. On F1
Bist.Acc. Call
Monost.Acc.Call
Att.Call En.Map
Att.Call to Group
Bistable
Call Rep. 6120
Roller Shutter Mode
Call Rep. for Grp. 2
Call Rep. for Grp. 3
Call Rep. for Grp. 4
TERMINAL MODE
VERT ID = 1
HORIZ ID = 1
ITALIAN =
ENGLISH =
Programming Diagram
Table for programming parameter "Call Rep. Type”:
Set
Function
0
(Default) Repeats external calls for devices programmed in GROUP parameter
1
Repeats EXTERNAL calls for GROUP
2
Repeats INTERCOM calls
3
Repeats EXTERNAL and INTERCOM calls
4
Repeats calls from 6120
5
Repeats EXTERNAL calls and calls from 6120
6
Repeats INTERCOM calls and calls from 6120
7
Repeats EXTERNAL and INTERCOM calls and calls from 6120
To change operating mode:
• Select the desired operating mode
• Press OK to confirm
En.Map Call Rep.
INSTALLATION
RELAY 1 or 2
Window present
only in
“Vertical”
configuration
En.Map Type
- with windows
- single ID
The parameter is changed by
pressing button 1
Enter
or
to select the relay to be
configured and confirm with
2.
and enter
the first menu
With
you change the configuration
(Vert / Horiz), you confirm with
2.
and
enter the ID number to assign to 69PH
In the GROUP submenu, enter the num-
ber to assign and confirm with
2.
.
Press
to go back to the menu
GROUP
Press
for menu
ENABLING MAP TYPE
Press
for menu
RELAY 1 or 2
2.
2.
2.
2.
5
2.
5
5
Call Progression
14
EN
69PH
