Vimar 8013406295507, Инструкция по установке и эксплуатации, Страница: 73 / 84

71
Graphic User Interface (GUI) for IP Speed Dome
EN
Create domain name.
After you successfully request your domain name, you will see your domain in the list.
3. Input the username, password, domain you apply for in the DDNS configuration interface. 4. Click “Save” button to
save the settings.
5.5.5 SNMP
To get camera status, parameters and alarm information and remotely manage the camera, you can set the SNMP
function. Before using the SNMP, please download the SNMP software and set the parameters of the SNMP, such as
SNMP port, trap address.
1 - Go to Config Network SNMP.
2 - Check the corresponding version checkbox (Enable SNMP V1, Enable SNMP V2, Enable SNMP V3) according to
the version of the SNMP software you download.
3 - Set the “Read SNMP Community”, “Write SNMP Community”, “Trap Address”, “Trap Port” and so on. Please make
sure the settings are the same as that of your SNMP software.
Note: Please use the different version in accordance with the security level you required. The higher the version is, the
higher the level of the security is.