Vimar 8013406295507, Инструкция по установке и эксплуатации, Страница: 61 / 84

59
Graphic User Interface (GUI) for IP Speed Dome
EN
4.4.3 Grouping Setup
Go to Dome Function Grouping Setup as below:
Go to “Edit Grouping” menu as shown below.
8 cruises can be set in a group. CRU 1 stands for Cruise 1, CRU 2 stands for Cruise 2 and so on. “Run Grouping”
means to run the cruises in order.
4.4.4 Task Setup
Go to Dome Function Task Setup menu as shown below:
By dividing 24 hours into several periods and appointing different commands for each period, the camera system will
automatically execute the commands according to the set time if there is no operation. Setting Steps:
1- Enable the task.
2- Set the task.
Time Format: Start Time – End Time. The tasks will be automatically executed in chronological order. Task Type: RSC,
ASC, PRE, CRU, TRA.
Note: The home position function will be disabled if enabling task setting.