Vimar 8013406295507, Инструкция по установке и эксплуатации, Страница: 63 / 84

61
Graphic User Interface (GUI) for IP Speed Dome
EN
4.4.7 Home Position
Go to System Setup Home Position menu as shown below:
The setting steps:
1 - Enable the home position function and select the preset which should be set in advance.
2 - Then select delay time (range from 007s to 180s) and exit the menu.
When the stand-by time of the dome camera exceeds the delay time, the camera will automatically execute the
command to monitor the selected preset.
ATTENTION: All the functions described above can also be configured from the WEB interface on the PTZ Function
screen in the picture below.
4.5 Display Setup
You can enable title display and time display if you need. (Some models may support temperature display or system
display).