Vimar 8013406295507, Инструкция по установке и эксплуатации, Страница: 54 / 84

52
Graphic User Interface (GUI) for IP Speed Dome
EN
4 Menu Setup
On the PTZ control panel of IE remote preview interface, call Preset 95 and click . This will take you to see the
following main menu setup.
ATTENTION: All the following menus and sub-menus may vary depending on the camera model. Refer to the menu of
your PTZ model.
- The menu setup can be displayed when the visualization of the live is set to main stream.
After you go to the main menu interface, you can select the menu by clicking the direction button ( ).
: To select menu by moving up and down.
To return to the menu on the left.
To confirm to enter sub-menu or to select the menu on the right.
4.1 System Information
Select System Setup by clicking or button and then click button to go to System Information menu as
shown below:
You can check the software and firmware version, camera, system temperature, date, dome ID, dome protocol and
baud rate here.
4.2 System Setup
Select System Setup by clicking or button and then click button to enter
System Setup as shown below: