Vimar 8013406295507, Инструкция по установке и эксплуатации, Страница: 59 / 84

57
Graphic User Interface (GUI) for IP Speed Dome
EN
4.3.4 Day & Night Setup
Day & Night Mode includes three modes: Auto, Night, Day and Time.
- Auto: Camera will automatically switch the mode between day and night as per the ambient illumination.
- Night:The camera will be night mode at all time. You’d better use this mode at night.
- Day: The camera will be day mode at all time. You’d better use this mode in daytime.
- Time: Camera will regularly switch the mode between day and night according to the set day and night time. Day &
Night Mode will be disabled if enabling this function.
- IR Sensitivity
Set the level of the IR sensitivity. The higher the value is, the more the sensitivity is.
4.3.5 Video Format
PAL or NTSC is optional.
4.4 Dome Function
Go to Dome Function menu as shown below:
4.4.1 Preset Setup
This function is used to memorize the specific position of pan, tilt, zoom and focus, giving much convenience for quick
return to this position by calling preset.
1 - Selecting the preset setup menu brings up the following menu.
2- Select the preset number.
3- Go to Edit CUR Preset interface as below: