Vimar 8013406295507, Инструкция по установке и эксплуатации, Страница: 46 / 84

44
Graphic User Interface (GUI) for IP Speed Dome
EN
1 Introduction
This Speed Dome IP-camera is designed for high performance CCTV solutions. Its digital flip technology makes omni-
directional and non-blind-spot monitoring into reality. It utilizes most advanced technologies, such as video encoding
and decoding technology, complies with theTCP/IP protocol, SoC (System on chip), etc to ensure this system more
stable and reliable.
Complete manuals and CVM.exe, Iptool.exe e Diskcalculator.exe software are available to download in the Product info
sheet section of www.vimar.com website.
Main characteristics:
- CMOS progressive scan
- HD network video output
- H.265/H.264 image compression format
- TCP/IP, DHCP, DDNS, NTP, RTSP, SMTP, FTP, PPPoE
- SD card local storage, network remote storage
- Web GUI menu
- Support selected area amplification and PTZ function
2 IE Remote Access
You may connect IP-Cam via LAN or WAN. Here only take IE browser (6.0) for example. The details are as follows:
2.1 LAN
In LAN, there are two ways to access IP-Cam:
1. access through IP-Tool;
2. directly access through IE browser.
2.1.1 Access through IP-Tool
Network connection:
1 - Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the PC from the CD.
2 - Double click the IP-Tool icon on the desktop to run this software as shown below:
3 - Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the information of the camera
listed in the above table to show the network information on the right hand. Modify the IP address and gateway of the
camera and make sure its network address is in the same local network segment as the computer’s. Please modify
the IP address of your device according to the practical situation.