Viking VX 900 MHz LTR, Руководство пользователя

Страница: 46 / 234

PULL DOWN MENUS
4-2
October 1999
Part No. 001-2009-201
Figure 4-4 EDIT PROGRAMMING FLOWCHART
Repeater Number
Channel Number
Stand-alone
CWID Time
CWID Message
Local Mic ID
Test Mode ID
Default
Repeater Number
Input Alarms
Output Alarms
Cross Reference Input Type Selection
Output Type Selection
Select Repeater
Alarm Configuration
EDIT
Setup Parameters F4
Alarm Cross Reference Selection
Delete Repeater
Repeater Type
Power Source
RF Power Level
Multi-Net
LTR
Universal Station
Frequency Band
Power Level
75W
800 MHz
800 MHz (-12.5 kHz)
900 MHz
Paging
Repeater Type
IAC Type
8 I/O IAC
4 I/O IAC
160W
TELCO Network Type
Area
Data Modem
Telephone Access Parameters
Telephone Interface
TIC Calibration Data
4.2.6 QUIT (ALT X)
Quit exits the repeater program and returns to
DOS. Save all files before exiting the repeater pro-
gram.
4.3 EDIT
Figure 4-5 EDIT MENU
Select Rptr
Alarm Config
File Edit Transfer Hardware Test Utilities
Auxiliary Parms
Setup Parameters F4
Delete Rptr
Repeater Type
Telephone Access Parms
Telephone Interface
TIC Calibration Data
4.2.4 PRINT REPEATER CONFIGURATION
Select the destination for the configurations.
Printer - Prints to printer connected to PC.
File - Writes printable test to selected filename.
Select which repeater data will be printed.
All Repeaters - Prints the data for all valid
repeaters.
Single Repeater - Print the data for the entered
repeater number.
NOTE: A list of valid repeaters can be seen under the Edit-
Select Repeater menu selection.
4.2.5 DOS SHELL
This temporarily suspends the program and returns
to DOS. Directories and other DOS commands can be
performed. To return to the program from DOS, type
EXIT and press Enter.