YOKOGAWA JUXTA F Series, Руководство пользователя, Страница: 1 / 4

User’s
Manual
1
Thank you for purchasing the JUXTA Signal Conditioner.
Please read through this manual before use for correct handling.
2-9-32, Naka-cho Musashino-shi, Tokyo 180-8750 Japan
http://www.yokogawa.com/ns/juxta/im/
You can download the latest manuals from the following website:
IM 77J08P01-01EN
1st Edition Oct. 2017 (YK)
CAUTIONARY NOTES FOR SAFE USE OF THE
PRODUCT
This User’s Manual should be carefully read before installing and
operating the product. Please keep this User’s Manual for future
reference. The following symbol is used on the product and in this
manual to ensure safe usage.
WARNING
Calls attention to actions or conditions that could
cause serious or fatal injury to the user, and indicates
precautions that should be taken to prevent such
occurrences.
The following symbols are used only in this manual.
CAUTION
Calls attention to actions or conditions that could
cause injury to the user or damage to the instrument
or property and indicates precautions that should be
taken to prevent such occurrences.
CHECKING PRODUCT SPECIFICATIONS AND
PACKAGE
(1) Checking the Model and Product Specifications
Check that the model and specifications indicated on the
nameplate
attached to the main unit are as ordered.
(2) Packaged Items
Check that the package contains the following items:
z
FP1P: 1
z
Mounting block: 2
z
Tag number label : 1
z
Mounting screw (M4 x 0.7): 2
z
User’s Manual (this manual)
GENERAL
The FP1P is a compact, front terminal connection type pulse
repeater that converts pulses from voltage-free contacts, open
collector contacts, voltage pulses, and current pulses into isolated
transistor switch pulses.
MODEL AND SUFFIX CODES
Model Suffix codes Description
FP1P -

1 *C Pulse Repeater
Input Signal -1 Transmitter power supply (12 V ±10%)
-2 Transmitter power supply (24 V ±10%)
Output Signal 0 Open collector
Style code *C Style C
1. MOUNTING METHOD
1.1 Installing/Uninstalling the Mounting Block
The mounting block is necessary for rack mounting or wall
mounting.
Installing the mounting block
z
Fit the mounting block into the grooves of the converter, and
slide it in the direction of an arrow as shown below-left.
Uninstalling the mounting block
z
Lift the stopper using a slotted screw-driver as shown be-
low-right, and pull the mounting block to remove it.
Groove
(Rack mounting)
Groove (Wall mounting)
Stopper
Mounting block
1.2 Rack Mounting
Take the FRK panel and install it on a mounting angle as shown
below. This method is suitable for high density mounting of the
converters on a 19-inch rack panel.
Mounting angle
M5 screw
(4 places)
FRK panel
Mounting screw (M4x0.7)
(2 screws in the package)
Mounting Dimensions
Mounting angle
450±1
465±1
Supplied spacer(50) or Wiring space(30 to 60)
50
25
25
50
Unit: mm
FP1P
Pulse Repeater