Viking MI 422, Инструкция по эксплуатации

Страница: 148 / 388

0478 131 9923 B - EN
146
– The obstacle is not firmly attached to
the ground – e.g. fallen fruit or tennis
ball
Remedy:
– Remove the obstacle or block it off with
a no-go area ( Ö 11.8)
– Remove the obstacle
Fault:
Driving tracks at edge of mowing area
Possible cause:
– Excessively frequent edge mowing
– Starting points in use
– Battery is charged very frequently
towards the end of its service life
– Corridor not activated
Remedy:
– Switch off edge mowing or reduce it to
once per week ( Ö 10.14)
– Start all mowing operations at the
docking station in suitable mowing
areas (
Ö 10.15)
– Replace the battery – observe
corresponding recommendation in the
display (
#
), ( Ö 23.)
– Activate corridor ( Ö 10.14)
Fault:
Unmown grass at edge of mowing area
Possible cause:
– Edge mowing switched off
– Perimeter wire routed inaccurately
– Grass is out of reach of mowing blade
Remedy:
– Mow the edge once or twice per week
( Ö 10.14)
– Check the routing of the perimeter wire
( Ö 10.14); check the clearances with
the iRuler ( Ö 11.5)
– Cut the unmown areas regularly using a
suitable grass trimmer
Fault:
No wire signal
Possible cause:
– Docking station switched off – LED
does not illuminate
– Docking station not connected to mains
supply – LED does not illuminate
– Perimeter wire not connected to
docking station – red LED flashes
rapidly
– Break in perimeter wire – red LED
flashes rapidly
– Robotic mower and docking station are
not linked
– Electronics fault
Remedy:
– Switch on the docking station ( Ö 12.1)
– Check power supply to the docking
station ( Ö 9.4)
– Connect the perimeter wire to the
docking station ( Ö 9.6)
– Find the wire break ( Ö 10.17), then
repair perimeter wire using wire
connectors (
Ö 11.14)
– Link robotic mower and docking station
( Ö 9.7)
– Contact a VIKING specialist dealer (
#
)
25.1 Handover confirmation
25.2 Service confirmation
Please hand this instruction manual
to your VIKING specialist dealer in
the case of maintenance work.
He will confirm the service operations
performed in the pre-printed boxes.
25. Service schedule
Service performed on
Next service date
2