7
PC Requirements
• IBM
compatible personal computer with:
Windows 2000 (service pack 4 or higher)
Windows XP (service pack 2 or higher)
Windows Vista (SP2 or newer), 32 or 64 bit versions
Windows 7
Windows 8
•
Adobe Acrobat Reader 8 or higher
• K-1775-IP
hardware
•
Available LAN with PoE (class 2, <6.5 watts)
•
Ethernet cable ( CAT5 min.)
•
1 MB minimum free hard drive space for installation
• 16MB of free physical RAM
Typical Installation on SIP Based VoIP Phone System
C. Using a Video Encoder to Convert the Analog NTSC Video to IP
Axis manufactures video servers that encode analog video signal for transmission across IP
network or the internet. The single channel model
M7001
is shown. Supplied software allows
you to access Axis units connected to the network (auto-discovery) and program them via a
web page interface. The video can then be monitored from any location on the network.
For more information, go to
www.axis.com
D. Adjusting the Camera
The camera can be tilted and rotated to your desired po-
sition. A portable service (test) monitor can be used to de-
termine the correct viewing angle during installation.
Important:
To prevent the edge of the faceplate from
being viewed in the video image, do not rotate the camera
beyond 30 degrees or tilt beyond 20 degrees.
Vertical (Tilt)
Adjustment
+/- 20 degrees
maximum
Horizontal (Rotation)
Adjustment
+/- 30 degrees maximum
1
2
ABC
5
JKL
8
TUV
0
OPER
4
GHI
7
PRS
#
3
DEF
6
MNO
9
WXY
VIKING
©
Axis Model
M7001 shown
(Extends range of cable, keeps
1 Gbps network speed for other
equipment on network)
SIP VoIP PBX
or
PC with
SIP Server
Software
100m (328 ft) max*
Viking
supplies
Customer’s
Responsibility
Internet
10/100 Mbps
Maximum
Viking
K-1770-IP
Entry Phone
* Note:
A PoE extender can be used for an additional 100 meters per extender. For longer runs (up to 2 km / 1.2 miles)
a ethernet to fiber media converter can be used.
Optional
PoE Injector
(If VoIP PBX does
not have PoE)
Optional
Switch / Hub
