13
4. Entry Code Database
Clicking on the “Entry Code Database” button will open a screen allowing you to display the Entry Code Database.
Clicking on the “Read Entry Codes” button will fill all the data in the Entry Code Database. It can take over a minute to
upload this data. The Entry Code Database will allow you to program the Relay Function, Relay 1 or 2, once only (one
time use only), Entry Type (Card, Keyless or both), Keyless Code, Proximity Card #, Facility Code, Day of week, Time
of Day and Tenant Name.
The Event Log button is used to open the Event Log screen. The Event Log screen shows you the time and date of
each event, the event type, relay action (which door/gate was opened or closed), entry code index and speed dial lo-
cation. The Event Log can store up to 4,095 events. Events are stored in a first in first out format. When the memory is
full, new events will over write the oldest events. The Event log can be saved in one of two file formats: Tab Delimited
Text or Comma Separated Variable. After saving the file you can then reset the Event Log.
3. Event Log
