15
15. Ring Cadence
16. Loud Ring Volume
17. Phone Mode
18. Call Button Delay
19. Call Button Auto Dial
The Phone Mode can be programmed to one of two settings: Auto Dialer or Manual Dial Phone. When set to Auto Dialer
the
K-1775-IP
will auto dial any preprogrammed phone numbers stored in the Phone Number Database when the cor-
responding Speed Dial Number (example: apartment number) is entered on the units keypad. When set to Manual Dial
Phone the units auto dialing features are disabled and the unit functions like a standard VoIP speaker phone. Pressing
the call button will take the phone off hook allowing you to manually dial the phone number on the keypad.
The Call Button Delay is the length of time from when the Call button is pressed and when the unit starts dialing the
Primary number programmed in Speed Dial location 0. The time is programmable from 0 to 6 seconds. Adding Call
Button Delay time is useful to allow visitors time after they have pressed the Call button to then enter the tenants
apartment number (Speed Dial Number) or their Keyless Entry Code.
The Call Button Auto Dial feature allows visitors that do not know the tenants apartment number (Speed Dial Number),
a way of simply pressing the Call button with no additional numbers entered. After the Call Button Delay the unit will
automatically dial the Primary Phone Number stored in Speed Dial location 0. This could route the call to the building
manager, care taker, receptionist, etc.
Keyless Entry Code and Proximity Card logging can be set to Log Errors. With Log Errors selected, the
K-1775-IP
will
not only log all valid Keyless Entry Code and Proximity Card entry’s but also log any errors or incorrect codes or non-
valid card reads.
Keyless Entry Code and Proximity Card logging can also be set to Live Logging. With Live logging selected and the
K-
1775-IP
programming software open and connected to a unit, each Keyless Entry Code entered or Proximity Card read
will immediately open the Event Log screen and display the latest entry.
When using date and time logged events or setting the access date and times of keyless codes or proximity cards in
the Entry Code Database you must program the unit to your time zone. Example: You are installing the
K-1775-IP
in
Central standard time zone. Select (UTC - 06:00) C, which is 6 hours behind Coordinated Universal Time (UTC).
The Loud Ring Volume can be set from 0 – 9. 1 = the lowest volume, 9 = the highest volume and 0 = disabled.
When “Auto Answer/Ring” on the
K-1775-IP
is set to “Loud Ring” or “Loud Ring with AGC” the Loud Ring cadence can
be programmed to one of 4 different cadence. Normal Ring (single ring, 2 sec on 4 sec off), Double Ring (double ring,
1 sec on .5 sec off 1 sec on 3.5 sec off), Short-Short-Long (triple ring, .5 sec on .5 sec off .5 sec on .5 sec off 1 sec on
3 sec off), Short-Long-Short (triple ring, .5 sec on .5 sec off 1 sec on .5 sec off .5 sec on 3 sec off).
20. Select Time Zone
The Daylight Saving Time programming can be enabled or disabled and can be programmed to start on any Sunday in
March and stopped on any Sunday in November. Currently, daylight saving time starts on the second Sunday in March
and ends on the first Sunday in November, with the time changes taking place at 2:00 a.m. local time.
21. Daylight Savings
22. Keyless/Card Logging
