PRODUCT MANUAL
Designed, Manufactured and Supported in the USA
C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S
K-1775-IP Series
VoIP Entry Phones with
Built-In Entry System, Proximity
Card Reader & Camera
September 25, 2015
VIKING
Features
Applications
Specifications
www.vikingelectronics.com
Information: (715) 386-8861
Vandal Resistant VoIP Entry Phones with
Built-In Entry System, Proximity Card Reader &
Analog Color Video Camera
• Built-in high resolution analog NTSC color video camera with wide viewing angle
tilt/swivel adjustments and wide operating temperature of
-40°F to 140°F
• Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card read
confirmation and EWP board protection
•
Vandal Resistant Features:
14 gauge louvered 316 stainless steel faceplate with
permanent laser etched graphics, speaker/mic screen, heavy duty metal keypad and
“Call” button,scratch resistant powder coating (
K-1775-BN-IP
) and T-10 Security Torx
drive mounting screws
•
Weather Resistant Features:
Marine grade 316 stainless steel faceplate, screws and
push button switch. Switch internally sealed per IP67. Mylar speaker. Self-draining mic
mount. Faceplate, mic and speaker gaskets. Weather resistant powder paint
(
K-1775-BN-IP
)
• Compatible with the following Viking proximity cards and Fobs:
PRX-C
,
PRX-C-ISO
and
PRX-FOB
, see DOD # 198
• Available in 2 standard faceplate finishes: 316 brushed stainless steel with laser etched
graphics or oil rubbed bronze powder paint with Copper metallic graphics
•
Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
• Optional
RC-4A
for Secure Remote Relay Control, See DOD# 582
•
Blue “Call /Status” LED indicator
•
SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
•
PoE powered (class 2, <6.5 watts)
•
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
• Programmable to speed dial up to 250 numbers
• Cycles to roll over phone number on busy or no-answer
• Program up to 1,000 keyless entry codes and/or proximity card numbers
• Keyless entry codes and proximity card numbers can be programmed to only
allow access at specific times and day of week
• Call logging with time and date stamp
• Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66
Ingress Protection Rating, see
DOD# 859
• Hangs up on busy signal, time-out or touch tone command
• Extended temperature range (-40°F to 140°F)
• Volume adjustments for microphone and speaker
• Zinc plated steel rough-in box included
• Optional
VE-6x7
Surface Mount Box available, See DOD# 424
• Optional
VE-LIGHT
kit to illuminate the front panel at night, See DOD# 428
•
Self diagnostic reports via email (testing com, mic, speaker & switch)
Power:
PoE class 2 (<6.5 watts)
Dimensions:
See Installation and Specifications
Operating Temperature:
-40° C to 60° C (-40°F to
140°F)
Humidity - Standard Products:
5% to 95% non-
condensing
Humidity - EWP Products:
Up to 100%
Audio Codecs:
G711u, G711a, G722
Network Compliance:
IEEE 802.3 af PoE, SIP 2.0
RFC3261, 100BASE-TX with auto cross over
Connections:
(1) RJ45 10/100 Base-T, (12) gel-filled
butt connectors
Installation requires the assistance of a Network Administrator / IT Technician.
!
The
K-1775-IP Series
entry phones provide a tough and attractive handsfree phone for apartment, and residential
door entry or applications requiring a vandal resistant VoIP speaker phone with built-in 125kHz proximity card
reader and Analog Color Video Camera. The
K-1775-IP Series
VoIP Entry Phones are designed to provide quick
and reliable handsfree communication for SIP VoIP phone systems with PoE. The
K-1775-IP Series
entry
phones can be programmed from any PC on the same LAN or remotely using a Static IP Address. The Entry
phones can dial up to 250 programmable numbers, read up to 1,000 proximity card numbers and provide analog
CCTV video of who is at your door or gate.. The
K-1775-IP Series
entry phones are available in two attractive
finishes: “brushed stainless steel” and “oil rubbed bronze”.
When a call initiated by the
K-1775-IP
is answered by an apartment or business tenant, a built-in contact closure
may be activated to control an electric gate or doorstrike. Up to 1,000 keyless entry codes may also be
programmed, providing tenants with keyless entry. The
K-1775-IP
also has a buit-in proximity card reader with
capacity to program up to 1,000 card numbers. Keyless entry codes and card numbers can be programmed to only allow access at specific times and/or day of the week. A request for exit
(REX) input is included for easy exiting. The
K-1775-IP
also has automatic call logging allowing you to review the time and date of the call, which door was open/closed, what keyless entry
code or proximity card was used, request for exit usage and whether it was an inbound or outbound call.
The
K-1775-IP-EWP
shares all of the features of the
K-1775-IP
in addition to Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or
condensation.
EWP
products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards. For more
information, see
DOD# 859
.
• Apartment Entry Phone
• Residential Gate Entrance or Door Entry Phone
• Courtesy and Customer Assistance Phone
• Automated Teller (ATM) Phone
• Security or Emergency Phone
• Hot-Line Phone
• Kiosk Phone with up to 250 number speed dialing
•
Use with any of Viking’s Proximity Cards:
PRX-C
,
PRX-C-ISO
and
PRX-FOB
, see DOD # 198
K-1775-IP
“Brushed 316 Stainless
Steel”
(similar to brushed nickel)
(showing optional VE-6x7
surface mount box)
K-1775-BN-IP
“Oil Rubbed Bronze”
(satin dark brown powder paint
with fine copper metallic)
