4
Features Overview
MAC:
18E80FXXXXXX
asdesaxtff
N.C. (Gray)
N.O. (Yellow)
COM. (Blue)
* On-Board 2 Amp
Relay Output Contacts
(2A@30VDC/ 250VAC max)
3 Gel-Filled Butt
Connectors
(included)
- Black
+ Red
Request for Exit
(
REX Input
)
Speaker
Microphone
MAC Address Label:
The
MAC address is aunique 12
digit number used by routers
to send network traffic to the
correct IP address.
PoE LAN Port 10/100, PoE
Class 1 (<4 Watts):
Connect
to your LAN via RJ45 plug
and CAT5 or greater twisted
pair wire.
Yellow Network Status LED:
Lights steady to indicate power
and data link. Blinks to indicate
network activity.
Motion Sensor Sensitivity
Adjustment Pot:
Sensitivity
can be adjusted from 1 to 4
inches. Factory set to 4 inches
(fully clockwise)
Green Unit Status LED
To Motion Sensor
Rear (PCB) View of E-20/30/32TF-IP Entry Phone
Green
Green
Yellow
Yellow
(Power typically not
required for gate controllers)
Doorstrike /
Magnetic Lock
120V AC
Connect to Optional
Doorstrike, Mag Lock,
Gate Controller, etc.
(not
connected)
Note:
The gel-filled (water-tight) butt connectors are designed for insulation displacement on 19-26 gauge wire with a
maximum insulation of 0.082 inches. Cut off stripped wire ends before terminating.
* Note:
The front panels of the
E-30/32TF-IP
are mounted using security Torx screws to help prevent intruders from removing
the panel and accessing the on board door strike/gate control relays. For applications requiring additional security, a Viking
model
RC-4A
remote relay controller can be used. The relay controller is mounted securely inside the building and connected
to the same LAN as the
E-30/32TF-IP
. For more information on the
RC-4A
Secure Relay Controller, see
DOD 582
.
