manualshive.com logo in svg
background image

3

Warnings & Safety Instructions

• Before beginning, please read these instructions completely and carefully. 

DO NOT

remove permanently affixed labels, warnings, or plates from the product. This may void the warranty. 

• Please observe all local and national codes and ordinances. 
• Please ensure that this product is properly grounded. 
• The installer must leave these instructions with the consumer who should retain for local inspector’s use and for future

reference. 

• Installation must conform with local codes or, in the absence of codes, the National Electrical Code, ANSI/NFPA-70 –

latest edition. 

In Canada:

Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1

and/or local codes.

Your safety and the safety of others is
very important.

We have provided many important safety
messages in this manual and on your
appliance. Always read and obey all 
safety messages.

This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.

All safety messages will be preceded by the
safety alert symbol and the word
“DANGER,” “WARNING” or “CAUTION.”
These words mean:

Hazards or unsafe practices 

which WILL result in severe personal

injury or death

DANGER

Hazards or unsafe practices 

which COULD result in severe personal

injury or death

Hazards or unsafe practices which

COULD result in minor personal injury 

or property damage.

All safety messages will identify the 

hazard, tell you how to reduce the chance

of injury, and tell you what can happen if 

the instructions are not followed.

WARNING

CAUTION

CAUTION

Be sure the electric power is 
off from the breaker box to the
junction box until the induction
warmer is installed and ready
to operate. The junction box
should be connected to a
suitable ground.

WARNING

The electrical power to the 
unit must be shut off while line
connections are being made.
Failure to do so could result 
in serious injury or death. 

WARNING

FIRE AND ELECTRICAL 
SHOCK HAZARD

DO NOT 

use an extension cord

with this appliance. Such use
may result in fire, electrical
shock, or other personal injury.

This appliance shall not be used for space
heating. This information is based on safety
considerations.

WARNING

Содержание Incogneeto

















Отзывы: