8
Installation
Mounting the Unit
The square collar should be installed first using 1/2” (1.2 cm) screws.
Make sure that it is perfectly square.
The unit is mounted simply by snapping into the collar via four spring
mounted “buttons”. The collar has holes pre-drilled on all four sides, but
only two sides are required to support the unit.
Install the unit with the “Antenna side” label on the same
side you want the Magneeto
TM
II communication tab to
located.
Natural Stone or Engineered Stone Counter-top
Natural Stone or Engineered Stone Counter-top
Mounting frame or collar
Look for “Antenna Side”
(other sides not marked)
Incogneeto Unit
Holes for
spring studs
1-1/4” (3.0 cm) stone with 1/2” (1.2 cm)
substrate.
or
3/4” (2.0 cm) stone with 3/4” (2.0 cm)
substrate
Mount using BOTTOM set of holes
1-1/4” (3.0 cm) stone with 3/4“
(2.0 cm) strips
Unit sits up in-between strips
Mount using TOP set of holes