9
Installation
In all cases, the Magneeto
TM
II wireless communicator tab must sit over the
antenna side of the unit installed under the counter.
The antenna runs the whole length of the unit, so that the Magneeto
TM
II
can be used in the “6 o’clock” or “3 o’clock” positions.
Side
Top
Mount units on Collar with Antenna Side on Guest Side.
Magneeto
TM
II wireless communicator must be above the Antenna Side.
Magneeto
TM
II can be used with the LED Indicator in the “3 o'clock” or “6
o'clock” position, but ideally in the “6 O'clock” position facing the servers and
not the guests. Servers can see that the system is working and guests are not
distracted by the lights.
Mount units on Collar with Antenna Side against the wall.
Magneeto
TM
II wireless communicator must be above the Antenna Side.
Magneeto
TM
II can be used with the LED Indicator in the “3 o'clock” or “6 o'clock”
position. The “3 o’clock” position avoids the lights shining directly at seated
guests, but servers can see that the system is working.
“3 o'clock” (ideal position)
“6 o'clock”
The Incogneeto units can be mounted side be side with NO additional cooling clearance needed. However, the serving vessel on top
can be the limiting factor for side-by-side installation, particularly if a chafer with a spoon holder is used.