Vigitron MaxiiPower Vi2208A, Руководство пользователя

Страница: 40 / 46

40
1.19.4 Saving and
Loading the SNMP
Configuration
1.19.5
Miscellaneous
Controls
1.19.6 Audible
Warning
Clear all
This button will clear or “uncheck” all available boxes.
Save Selected Ports
After the SNMP ports have been selected, they must be saved by pressing this
button. Failure to do so will result in the loss of the selected ports.
Check Midspan Connection
This button will attempt to connect, over the network, to any highlighted Midspan in
the “SNMP Midspan List”. If a connection is successful, the appropriate number of
checkboxes will be enabled. For example, a Vi2208A will only enable boxes 1-8,
while a Vi2216A will enable all 16 boxes. However, if boxes 9-16 are checked for an
eight port Midspan, they will be ignored during the SNMP polling.
Save Configuration
This button will save the current SNMP configuration. Once saved, the GUI can be
closed and the saved configuration will be automatically loaded when the GUI is
restarted.
Load configuration
This button will load a previously saved SNMP configuration.
Error Check
If a Midspan IP address or description is changed, it is important to update the
“SNMP Midspan List” with the new information. Any discrepancy between the two
will result in erroneous SNMP messages. To prevent this type of situation, please
click the “Error Check” button prior to starting SNMP.
Start SNMP
This button will start the SNMP polling. There must be at least one address listed in
the “SNMP Midspan List”. Once started, the message “SNMP Activated-Multiple
Midspans” will be sent. The GUI cannot be connected to a Midspan while running
SNMP polling. Starting SNMP will perform a disconnection.
Stop SNMP
Clicking this button will stop the SNMP polling and send the SNMP message “SNMP
Deactivated-Multiple Midspans”.
If this box is checked, and the GUI is minimized, there will be an audible warning
after an SNMP message has been sent. The host computer must have speakers to
play the warning. Expanding the GUI will silence the warning. By default, this box is
unchecked.