Vigitron MaxiiPower Vi2208A, Руководство пользователя

Страница: 19 / 46

19
Connecting
Through an
Ethernet Cable
Open the GUI or if not already installed, run the GUI executable file (xxxxx.exe) on
the PC.
Step 1 – Acquire your network information.
Log into the GUI by entering the
username and password. If this is the first time the GUI is opened, a username and
password must be inputted.
Go to the “IP Address Configuration” tab. Click on “Display Computer IP Address”.
The example below shows an IP Address of 192.168.2.35 for the computer.
Note :
Some computers will have more than one IP Address. Be sure to use the IP address
that will be used to connect to the Midspan.
Step 2 – Locate any Midspans on your network. Click on “Find all Midspan IP
Addresses”. A list of Midspan IP Addresses will appear in the window. Select the
Midspan address to be reprogrammed by clicking on the IP Address. If
reprogramming the Midspan IP Address is not necessary, skip to Step 4.
Step 3 – Program Midspan to operate on your network. Selecting the Midspan to
be programmed in step 2 will place the IP Address into the box labeled “Current IP
Address”. If changing the Midspan IP Address is necessary, input the new values for
the IP Address, Default Gateway, and Subnet Mask. Then, press the “Program New IP
Address”. The example below shows the IP Address being changed from
192.168.2.107 to 192.168.2.117
.