Vigitron MaxiiPower Vi2208A, Руководство пользователя

Страница: 15 / 46

15
1.6 Regulatory
Certifications
1.7 Included
Accessories
1.8 Hardware
Setup
1.9 LED
Diagnostics
1.10 GUI System
Requirements
CE, RoHS, WEEE, UL, cUL
Accessories:

Mounting brackets for front, rear, or wall installations

Rubber feet for desk applications

Molded IEC 7 ft. (200 cm) power cord

8 or 16 Cat5 cables with RJ45 connectors (Vi22/25 series)

1m 5 conductor with circular 5-pin connectors on both ends (Vi25xxS and
Vi26xxS)
*Specifications subject to change without notice.
Please follow the following steps to install the Midspan:

Connect an AC power cable to the Midspan.

Use either an Ethernet or a USB cable to connect the Midspan to the Host
PC.

Connect a PoE powered device (PD) to one of the Midspans ports using a
Cat5/6 or coax cable, depending on your model. Extended Midspans must
use an extender unit before the PD. UTP Midspans are compatible with
models Vi2300A and Vi2301A, while coax Midspans use models Vi2400A
and Vi2401A.

The Midspans are set to “Auto” mode by the factory. In this mode, the
Midspan works as a plug and play device. It automatically detects the PD
and provides requested PoE power.

To use the GUI (Graphical User Interface), a computer can connect to the
Midspan through either a USB cable or through a network connection.
When using a USB cable, the GUI should be started after the computer is
connected to the Midspan.
Each port is equipped with an LED that provides port status as the following:

Off: The port is off and no Power is provided.

On: PoE power is on and is powering a valid PD.

Slow Blinking: The port does not have enough power for the load.

Fast Blinking: It warns that the connected PD is shorted or over current.
Recommended Operating system
: Windows XP, Vista, Windows7 and Windows 8. It
requires Microsoft .NET Framework 4 installed on the host computer.
Port Communication: Ethernet or USB port.