245
4-6.2 Radius
Overview
Parameter
Description
This section shows you an overview of the RADIUS Authentication and Accounting
servers status to ensure the function is workable.
Web Interface
To configure a RADIUS Overview Configuration in the web interface:
1.
Checked “Auto-refresh”.
Figure 4-6.2: The RADIUS Authentication Server Status Overview
#:
The RADIUS server number. Click to navigate to detailed statistics for this server.
IP Address:
The IP address and UDP port number (in <IP Address>:<UDP Port>
notation) of this server.
State:
The current state of the server. This field takes one of the following values:
Disabled:
The server is disabled.
Not Ready:
The server is enabled, but the IP communication is not yet up
and running.
Ready:
The server is enabled, IP communication is up and running, and the
RADIUS module is ready to accept access attempts.
Dead
(X seconds left): Access attempts were made to this server, but it did
not reply within the configured timeout. The server has temporarily been
disabled, but will get re-enabled when the dead-time expires. The number
of seconds left before this occurs is displayed in parentheses. This state is
only reachable when more than one server is enabled.