212
3-21 Trap Event
Severity
Parameter
Description
The function is used to set an alarm trap and get the event log. The trap events
configuration function is used to enable the switch to send out the trap information
while pre-defined trap events occurred.
Web Interface
To configure the Trap Event Severity Configuration in the web interface:
1.
Click Configuration and Trap Event Severity Configuration.
2.
Scroll to select the group name and severity level.
3.
Click “Apply” to save the setting.
4.
If you want to cancel the setting, click the reset button to revert back to
previously saved values.
Figure 3-21.1: The Trap Event Severity Configuration
Group Name:
The field describes the trap event definition.
Severity Level:
Scroll to select the event type - Emerg, Alert, Crit, Error, Warming,
Notice, Info, orDebug.
Buttons:
Apply
– Click “Apply” to save changes.
Reset-
Click “Reset” to undo any changes made locally and revert back to
previously saved values.