178
Queue Scheduler Percent:
Shows the weight in percent for this queue. This
parameter is only shown if scheduler mode is set to "Weighted".
Port Shaper Enable:
Controls whether the port shaper is enabled for this switch
port.
Port Shaper Rate:
Controls the rate for the port shaper. The default value is 500. This
value is restricted to 100-1000000 when the unit is "kbps", and it is restricted to 1-
1000 when the unit is "Mbps".
Port Shaper Unit:
Controls the unit of measure for the port shaper rate as "kbps" or
"Mbps". The default value is "kbps".
Buttons:
Apply –
Click “Apply” to save changes.
Reset-
Click “Reset” to undo any changes made locally and revert back to
previously saved values.