218
4-2 ARP Inspection
4-2.1 Configuration
The section describes how to configure the ARP Inspection parameters of the switch.
You could use the ARP Inspection configure to manage the ARP table.
This section describes how to configure the ARP inspection setting including:
Mode (Enabled and Disabled)
Port (Enabled and Disabled)
Web Interface
To configure an ARP Inspection Configuration in the web interface:
1.
Select “Enabled” in the mode of ARP inspection configuration.
2.
Select “Enabled” of the specific port in the mode of port mode
configuration.
3.
Click “Apply”.
Figure 4-2.1: The ARP Inspection Configuration