ViewZ RTDVR series, Руководство пользователя

Страница: 25 / 136

25 | P a g e
3-4. Setup – Device Mode
In the SETUP menu, select the DEVICE tab. Then, the device menu is displayed as pictured below.
Figure 3.4.1. Device Mode Setup Screen
Table 3.4.1. Menu Items in Device Setup Screen
Item Description
ALARM OUT Set the sensor, motion, and video loss for each alarm.
CONTROLLER & PTZ Set the PTZ baud rate, protocol, and ID.
SPOT-OUT Set the all details for spot monitoring. It supports 2 spot-outs.
CHANNEL Select specified channel for motion zone setup.
MOTION ZONE Select either Full Zone or Partial Zone for motion sensing.
MOTION SENSITIVITY Set the motion sensitivity for the specified channel.
Control the motion sensitivity from 1 to 9.
PRIVACY ZONE Set the privacy zone for the specified channel.
KEY TONE Enable/disable key tone.
REMOTE CONTROL ID
Select an ID of remote control.
1. Select ID number.
2. Press the same number as ID set in DVR on the remote control.
3. An icon will be displayed on the Live Screen that corresponds to the
remote control ID number.0
The options are from 0 to 99
SENSOR Select sensor NO from 1 to 4
TYPE Set the type of sensor for the specified channel. Options are: OFF, N/O
(normal open), and N/C (normal closed).