13
Host Mode
Under host mode, VB-CAM-201 can automatically connect to VB-AUD-201 and has
a connection capacity of two. If the connection is not reaching maximum capacity,
VB-CAM-201 will continuously search for VB-AUD-201 until reaching maximum
capacity.
NOTE:
If the connection time goes over 60 seconds, push the Bluetooth pairing
button again on VB-AUD-201.
Host mode provides two options,
Host 1
and
Host 2
.
Host 1:
Under Host 1, the audio is only output from VB-AUD-201 and the speaker on VB-
CAM-201 is mute. If the voice out volume is too low, adjust the volume on VB-
AUD-201.
Voice Out
Voice Out
Mic In
Mic In
Host 2:
Under Host 2, the audio will output from both VB-CAM-201 and VB-AUD-201
speakers. To avoid any negative influence from a stereo effect, the voice volume of
the VB-AUD-201 is limited to a minimum level and cannot be adjusted.
Voice Out
Mic In
Mic In
NOTE:
The default setting of Host mode is Host 2. The user can switch the Host
mode in
BT Host Mode
setting in the OSD Menu or via Remote Control.
Refer to page 37
to know the LED light difference between Host 1 and
Host 2 mode.