15
Remote Control Pairing
1.
Connect the power supply to the camera and power it on.
2.
Clear the paired status of the remote control:
ͫ
Press the
Menu Button
and
OK
buttons at the same time, keep pressing
until the remote control indicator shows a steady red light, release the
buttons to successfully clear the paired remote control.
3.
Trigger the camera to enter the remote control pairing mode:
ͫ
Press the
Reset
button on the camera, and the camera’s LED light will switch
to blue. This indicates it has entered pairing mode.
NOTE:
Each time you enter pairing mode, there is only 15 seconds of operation
time. After which, the pairing mode will automatically end.
4.
Start pairing:
ͫ
Using a cleared remote control, press and hold the
Menu Button
, and wait
for the pairing to complete.
ͫ When the normal pairing is successful, the camera’s LED light will be flashing
blue.
ͫ If the pairing fails, please repeat steps 2~4 until the pairing is successful.
NOTE:
The remote control has been paired with the VB-CAM-201 at the
factory, and it can be used normally without any special operation.
