30
IP address
Manually insert the IP address, but make sure that IP address is not occupied by
another device.
Subnet mask
Manually insert the subnet mask.
Gateway
Manually insert the gateway address (or known Router IP address).
DNS address
Manually insert the DNS server’s IP address.
MAC address
Display of the MAC address
Port Settings
Http Port number
The standard port for the HTTP protocol is 80. As an alternative, this port can be
assigned a value between the number of 1025 ~ 65535. If several IP cameras are
connected in the same sub network, then assign a different and unique number
HTTP port for each camera.
RTSP Port
The standard port for the RTSP transmission is 554. As an alternative, this port can
be assigned a value between the number of 1025 ~ 65535. If several IP cameras are
connected in the same sub network, then assign a different and unique number
RTSP port for each camera.
RTSP Settings
RTSP auth
•
On: enables authentication.
NOTE:
Username and password are required for transmitting video data via
RTSP.
•
Off: disables authentication.
NOTE:
When changing the above network settings, don’t forget to click the
Apply
button to use the new setting(s), or click the
Cancel
button to
abort the new setting(s) and use the current setting(s).
