Viewse VC-EX861, Инструкция по установке и эксплуатации

Страница: 33 / 42

function switch
able
Table 7
7. Troubleshooting
Problems Possible Causes Remedies
No action when
power is
switched on
Power supply fault Replace
Bad connection of the power Correct
Transformer damaged Replace
Abnormal self-
check. Images
with motor
noise
Mechanical failure Repair
Camera inclined Reinstall
Power supply not enough Replace
Normal self-
check but no
images
Video signal fault Reinstall
Bad connection of the video Press to connect well
Camera damaged Replace
Normal self-
check but out of
control
RS485 bus bad connection Check the RS485
connection
Dome ID setup is wrong Reselect
Protocol setup is wrong Reset and Switch
ON again
Vague image Bad connection of the video Press to connect well
Power supply not enough Replace
Dome camera
out of control
Self check error Switch ON again
Bad connection of control Press to connect
well
Bad control of matrix Switch ON again
Table 8
Appendix
Ⅰ
: Lightning Proof and Surge Signal Proof
The product adopts TVS lightning proof technology to prevent from
damage by lightning strike below 1500 W and impulse signals such
as surge; but it is also necessary to abide by the following
precautions to ensure electrical safety based on practical
circumstances:
-29292929 29