Viewse VC-EX861, Инструкция по установке и эксплуатации

Страница: 15 / 42

POS – No. of preset position
SP – leaving speed
TM – dwelling time
After entering into edit area, screen shows as follows:
Edit Area, data of 2 patrol position appears on one line
.
SEQ:01– It means the set No.1 patrol
CLOSE: EXIT– Push CLOSE to exit edit state
Both top and bottom lines display prompt and information of each
patrol is displayed on the middle of the screen. Data of 2 Patrol
points appears on one line. Move cursor by PAN LEFT/RIGHT
and modify data by TILT UP/DOWN. Press buttons for one
second to speed up operation. Press CLOSE button to exit edit
state and store modifications. The program will search the
position of the first “---” of POS, store dada before it and regard
data after it as invalid. In above figure, the program stores
previous four points with settable range from 1 to 63 and from 65
to 128. When “---” of POS appears, the tour range is ended. The
settable range of SP is from 0 to 8 (0 and 1 are the same with
fastest speed while 8 has the lowest speed). The settable range
of TM is from 0 to 99 seconds.
3.2 Operation of Title of Preset Point in Edit State.
When entering into edit state the screen displays as follows:In
the figure we find the preset point is
No.1 with title of “NO TITLE”. Move
cursor by PAN LEFT/RIGHT and
-11111111 11